products

Refrigerated trailer-20T

Inquiry now

product introduction

Truck Specification
Product Name				Refrigerated semi trailer
Overall dimensions (L×W×H) （mm)				about 1000026004000mm
Refrigeration Van Dimension (L×W×H) （mm)				980024802600mm (30ft)
Van body
Material of van except bottom		Outside and inside		Aluminum plate
		Thermal insulation		Non-toxic chemical raw materials, rigid polyurethane with the best heat insulation performance and strength improvement materials. Thickness: Side : 76mm, top and front :100mm, rear door :80mm.
Manufacturing Sequences				Through the special mold pressure measurement, heat measurement, vacuum molding sheet, with galvanized pipe plus environmental protection waterproof board connected with screws, 3.0 thick one spectrum glass fiber reinforced plastic high strength imported adhesive lapping from the polymer composite material box, good sealing, not easy to drum and water leakage
Material of van bottom				Anti - slip pattern aluminum plate, ventilating slot. Thickness : 64mm
Dimension				980024802600mm
Door				Rear door open, with stainless door frames and door accessory
Refrigeration Unit
Brand			Carrier
Model			VECTOR 1550
Temperature Range			-30ºC Temperature can be controlled
Diesel engine Refrigerating power			2℃/38℃	14995W
			-30℃/38℃	8285W
Electical refrigerating power			0℃/30℃	13200W
			-30℃/30℃	7360W
Heating power			-18℃/18℃	8800W
Air volume				5700m³/h
Compressor model				ZF19VE-164
Refrigerant R404A			Filling capacity	5kg
Applicable compartment volume -30℃/40℃				85m³
Semi trailer
Chassis	Stringer height of 500mm, up / down flap14mm/16mm web 6mm; back plane; border 16 #channel steel, square tube runs through the beam;
Axle	2 axles,FUWA 13T
Suspension	Mechanical suspension
King Pin	2'' or 3.5''
Landing Gear	28Ton Tongyi brand, Manually operated
Wheel Rim	8.5*20,8 pieces
Tyre	12.00R22.5 tubeless tire , 8 pieces
Spare Tire Rack	one
Braking System	T30/30 Spring brake chamber; 40L air tanks with WABCO air controlled system.
Light & wire	LED Combination Rear Lights, and LED Side lights. wire and 7-pin socket
Accessories
Side Under Run				Carbon steel to manufacturer’s standard.
Mud guard / Mud Flap				Mudguard and rubber mud flap, to manufacturer’s standard.
Spare Wheel Bracket				1piece, to manufacturer’s standard.
Light				Electrical system in accordance to Chinese standard, complete with Chinese’s light for tail, signal, reverse, nameplate light and, and side marker lights at both sides of truck, complete with reflective tape at two sides and rear of the truck.
Painting				1 Coat of anti-corrosive prime, 2 coats of final paint . Colour as request
Reflector/remark				3M/ manufacturer's standard